How To Fix A Zippo Lighter [PATCHED]
Click Here >>>>> https://shoxet.com/2tvq9Y
How to Fix a Zippo Lighter: A Step-by-Step Guide
Zippo lighters are iconic and durable, but they can also run into some problems over time. Whether your Zippo lighter is not lighting properly, running low on fuel, or having a worn-out wick, you can fix it yourself with some simple tools and tips. Here is a step-by-step guide on how to fix a Zippo lighter.
Step 1: Check the Flint
The flint is the part of the Zippo lighter that creates sparks when you flick the wheel. If your Zippo lighter is not sparking at all, or only producing weak sparks, you may need to replace the flint. To do this, you will need a small screwdriver or a paper clip.
Remove the inside unit of the Zippo lighter from the case by gripping both sides of the wheel and pulling up.
Turn the unit over and locate the small screw on the bottom of the felt pad.
Unscrew the screw and remove the spring and the old flint.
Insert a new flint into the flint tube and replace the spring and screw.
Reinsert the unit into the case and test the lighter.
You can buy Zippo flints at most drug stores or online. You should replace the flint every few months or whenever it stops sparking well.
Step 2: Refill the Fuel
The fuel is what keeps your Zippo lighter burning. If your Zippo lighter is producing a weak or yellow flame, or no flame at all, you may need to refill it with lighter fluid. To do this, you will need a can of Zippo lighter fluid or a similar product.
Remove the inside unit of the Zippo lighter from the case as before.
Turn the unit over and lift the felt pad with a screwdriver or a paper clip to expose the packing material.
Insert the nozzle of the lighter fluid can into the opening and squeeze gently for 3-5 seconds. Do not overfill or spill the fluid.
Replace the felt pad and wipe off any excess fluid from the unit and case.
Reinsert the unit into the case and wait for a few minutes before lighting it.
You can buy Zippo lighter fluid at most drug stores or online. You should refill your Zippo lighter every few weeks or whenever it runs low on fuel.
Step 3: Replace the Wick
The wick is what carries the fuel to the flame. If your Zippo lighter is not lighting properly, or if you see black carbon buildup on the wick, you may need to trim or replace it. To do this, you will need scissors or wire cutters.
Remove the inside unit of the Zippo lighter from the case as before.
Pull up on the wick with tweezers or pliers until you see a clean section of it.
Cut off the blackened part of the wick with scissors or wire cutters so that it is even with the top of the chimney.
If there is no clean section of wick left, you will need to replace it with a new one. To do this, remove all of the packing material from the unit and insert a new wick through the chimney hole. Then replace the packing material in small pieces, weaving the wick between them in an S shape.
Reinsert the unit into the case and test the lighter.
You can buy Zippo wicks at most drug stores or online. You should trim or replace your wick once or twice a year or whenever it gets too dirty. aa16f39245